Before the Refit Skip Arrives: Finding the Metal Value in a Pub Cellar
Photo: Geographer , CC BY-SA 2.0, via Wikimedia Commons
The bit of the pub nobody photographs
A pub refit is a strange mix of excitement and chaos. New taps, new tiles, a fresh coat of something dark green, and a skip on the forecourt by Tuesday. But while everyone is arguing about bar stools, the cellar is quietly sitting there with more recoverable metal in it than most publicans realise.
If you are planning a cellar clear-out or a full renovation in 2026, it pays to treat the metal as a separate job rather than something to chuck in with the rotten shelving. B&P Scrap Co. works with plenty of trade customers, and the pattern is always the same: the value is in the details, not the bulk.
What is actually down there
Start with the beer lines. The flexible stuff is usually plastic or lined tubing, but the fittings, couplers, manifolds and the odd copper run are where the weight sits. Copper beer line is not unusual in older pubs, and even short lengths add up once you have pulled them out properly.
Then there are the kegs. Stainless steel kegs are not scrap in the ordinary sense — they are often returnable assets with a deposit attached. Check with your supplier before you weigh anything in. If a keg is genuinely beyond use, or has been orphaned by a brewery that no longer exists, a scrap collector can price it as stainless. Just do not let a helpful labourer lob a dozen deposit-bearing kegs into the skip because they look tired.
Cellar cooling units are another one. The condenser, fan motor, copper pipework and aluminium fins all contain metal, but the unit needs to be dealt with safely. Refrigerant has to be recovered by someone competent, so do not start cutting pipes to see what happens. A reputable collector will either take the unit intact or tell you what needs doing first.
Saleable stainless versus true scrap
The biggest mistake in a pub clearance is treating every shiny thing as scrap. Stainless steel has grades, and some bar fittings, splashbacks, shelving and prep tables are worth more as second-hand commercial kit than as weighed-in metal. If it is clean, straight and still has a market, sell it. If it is bent, drilled, rusted or welded into the fabric of the building, it is probably scrap.
Bar fittings are a good example. Old beer fonts, drip trays, hand pulls and under-bar brackets are often mixed metals. Some are brass or copper alloy, some are stainless, some are plated mystery metal. Sorting them into rough groups before collection makes the pricing clearer and saves everyone time on the driveway.
The paperwork and access question
A pub cellar is rarely easy to access. There are stairs, tight corners, low beams, possibly a trapdoor and definitely a delivery schedule to work around. Tell your collector about access before they quote. A fair price assumes a straightforward collection; a fair collector will ask whether there is a lift, a ramp, a cellar hatch or a 200-metre carry through a crowded beer garden.
If you are a tenant, check your lease before you sell anything fixed to the building. Fixtures and fittings can belong to the pub company, even if you paid for them. The same goes for kegs and any branded equipment. A quick email to your area manager is cheaper than an awkward conversation later.
Booking the collection without stopping service
You do not need to shut the pub to clear the cellar metal. Most collections can be booked for a quiet morning or a Monday after the weekend rush. Have the metal separated into three rough piles: clean stainless, copper and brass, and mixed scrap. Keep anything you are unsure about to one side and ask for it to be priced separately.
B&P Scrap Co. prices clearly and weighs in front of you. That matters in a trade job because you are not just getting rid of waste — you are recovering value from equipment you have already paid for once. A vague quote over the phone is not much use when the skip is already booked.
The last orders checklist
Before the refit crew arrives:
- check whether kegs are returnable or owned by the brewery;
- remove beer line fittings and copper runs without cutting refrigerant pipes;
- separate stainless bar kit that can be resold from bent or broken scrap;
- ask your collector about cellar access, stairs and parking;
- keep a photo record of anything valuable before it leaves the site;
- get the weight and price explained on the day, not after the metal has gone.
A pub cellar clear-out will never be glamorous. But done properly, it turns a hidden corner of the building into a sensible bit of refit budget — and keeps a useful pile of metal out of the skip.